KNX Switching/Blind actuator 6/3gang
Referenznummer: 63791024
The KNX Switch actuator / Blind actuator receives telegrams from sensors or other controls via the KNX and switches electrical loads. The relay outputs of the actuator can be set in the ETS either to Venetian blind operation (2 relay outputs per channel) or alternatively (1 relay output per channel) to switching operation; mixed operation of these two operating modes is also possible on the device. In Venetian blind operation the actuator can be used with its relay contacts to control electrically driven Venetian blinds, shutters, awnings, roof windows, venting louvres or similar blinds/shutters that are suitable for mains voltage. Alternatively, the actuator in switching operation switches electrical loads, such as lighting systems or door openers.
Product features
- Outputs can be operated manually, construction site mode
- Manual switching between Venetian blind operation and switching operation without commissioning
- Feedback in manual mode and in bus mode
- Disabling of individual outputs manually or by bus
- Status feedback (e. g. wind alarm)
- KNX Data Secure product
- Updateable with Insta ETS Service App
Characteristics switch operation
- Operation as NO or NC contacts
- Feedback function
- Logic and restraint function 82402642 04.06.2024 4 / 15
- Switching actuator 16 A / Blind actuator 16 A
- Central switching functions with collective feedback
- Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
- Scene function
- Operating hours counter
Characteristics Venetian blinds operation
- Suitable for AC motors 110...230 V
- Operating modes "Venetian blind with slats", "Roller shutter/awning", "Venting louvre/roof window"
- Blind/shutter position directly controllable
- Slat position directly controllable
- Feedback of movement status, blind/shutter position and slat position
- Forced position through higher-level controller
- Safety function: 3 independent wind alarms, rain alarm, frost alarm
- Sun protection function with heating/cooling operation
- Disabling function (lock-out protection)
- Scene function
Logic function characteristics
- Logic gate
- Transformer (conversion)
- Disabling element
- Comparator
- Limit value switch
Specifications
| Standby power | max. 0.2 W |
| Power loss | max. 1.2 W |
| Ambient temperature | -5 ... +45 °C |
| Storage / Transport temperature | -25 ... +70 °C |
| Switching voltage | AC 250 V ~ |
| Switching current | 16 A/AC1 |
| Fitting width | 72 mm / 4 TE |
Connected load |
|
| HV-LED lamps | 400 W |
KNX |
|
| KNX Medium | TP 256 |
| Rated voltage KNX | DC 28 ... 31 V SELV |
| Current consumption KNX | 5 ... 12mA |
| Connection type for bus | Anschlussklemme |