KNX Schnittstellen

The LED rotary dimmer insert works according to the trailing edge phase control dimming principle and enables the switching and dimming of incandescent lamps, HV halogen lamps and dimmable LED lamps. The dimmer is equipped with a pressure changeover switch.

• Battery-operated module with four push-buttons
• Flexible installation possible
• Smart functions
• Suitable for switching lights on and off and setting the desired brightness at the touch of a button, for example
• Pre-programmed scenes and automatic functions, e.g. to move the shading at the touch of a button

• Brightness setting for luminaires with DALI interface
• Setting the colour temperature for luminaires with DALI Device Type 8 for Tunable White in accordance with IEC 62386-209
• Rotary control point (input device) for higher-level DALI-2 controllers
• Mounting in appliance box with dimensions according to DIN 49073

• Brightness setting for luminaires with DALI interface
• Setting the colour temperature for luminaires with DALI Device Type 8 for Tunable White in accordance with IEC 62386-209
• Rotary control point (input device) for higher-level DALI-2 controllers
• Mounting in appliance box with dimensions according to DIN 49073

• Switching and dimming of lighting 230 V
• Mounting in appliance box with dimensions according to DIN 49073
• Operation with suitable cover

• Switching and dimming of lighting 230 V
• Mounting in appliance box with dimensions according to DIN 49073
• Operation with suitable cover

• Electronic room temperature controller for controlling electrothermal valve drives for 230 V ~
• Control of the room temperature in closed rooms
• Mounting in appliance box with dimensions according to DIN 49073
• Operation with suitable cover

• Electronic room temperature controller for controlling electrothermal valve drives for 230 V ~
• Control of the room temperature in closed rooms
• Mounting in appliance box with dimensions according to DIN 49073
• Operation with suitable cover

• Electronic temperature controller for controlling electric underfloor heating or floor temperature conditioning systems
• Control of the floor temperature in closed rooms
• Mounting in appliance box with dimensions according to DIN 49073
• Operation with suitable cover

• Electronic temperature controller for controlling electrothermal actuators for AC 24 V
• Control of the room temperature in closed rooms
• Mounting in appliance box with dimensions according to DIN 49073
• Operation with suitable cover

• Switching and dimming of lighting 230 V
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• Operation via installation button

• Speed controller for controlling the speed of single-phase motors e.g. induction or shaded pole motors
• Mounting in appliance box according to DIN 49073
• Operation with suitable cover

• Matter Push Button Module available as an OEM white label product
• Battery operated
• 4 push buttons
• with free configuration
• manufacturer-independent

• Supplying KNX devices with bus voltage
• Supplying additional devices with direct current
• Mounting on DIN rail according to DIN EN 60715 in sub-distribution unit

• Supplying KNX devices with bus voltage
• Supplying additional devices with direct current
• Mounting on DIN rail according to DIN EN 60715 in sub-distribution unit

• Supplying KNX devices with bus voltage
• Supplying additional devices with direct current
• Mounting on DIN rail according to DIN EN 60715 in sub-distribution unit

• Supplying KNX devices with bus voltage
• Supplying additional devices with direct current
• Mounting on DIN rail according to DIN EN 60715 in sub-distribution unit

• Connects two KNX lines/segments/areas with each other in terms of data and ensures electrical isolation between these lines/segments/areas
• Can be operated as an area coupler, line coupler, segment coupler or amplifier by addressing
• Installation in small distribution boards on top-hat rail in accordance with IEC 60715

• Switching of electrothermal valve drives for heaters or cooling ceilings
• Operation in KNX system
• Installation in sub-distribution units on DIN rail according to DIN EN 60715

• Operating in KNX systems
• Switching of electrical consumers via relay contact
• Reading in switching states of installation switches or push-buttons and other potential-free contacts at inputs 1...3
• Switch actuator 1gang 16 A with 3-gang binary input
• Signal evaluation of condensation and leakage sensors at inputs 1...3.
• Acquisition of temperature values via NTC temperature sensor at input 3
• Mounting in appliance boxes according to DIN 49073

• Operating in KNX systems
• Switching and dimming of lighting
• Reading in switching states of installation switches or push-buttons and other potential-free contacts at inputs 1...3
• Signal evaluation of condensation and leakage sensors at inputs 1...3.
• Acquisition of temperature values via NTC temperature sensor at input 3
• Mounting in appliance boxes according to DIN 49073

• Switching of electrical loads with potential-free contacts
• Switching of electrically-driven Venetian blinds, roller shutters, awnings and similar hangings
• Installation in sub-distribution units on DIN rail according to DIN EN 60715

• Switching of electrical loads with potential-free contacts
• Switching of electrically-driven Venetian blinds, roller shutters, awnings and similar hangings
• Installation in sub-distribution units on DIN rail according to DIN EN 60715

• Switching of electrical loads with potential-free contacts
• Switching of electrically-driven Venetian blinds, roller shutters, awnings and similar hangings
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover

• Operating in KNX systems
• Switching electrical loads via relay contacts with common reference potential
• Switching of electrically-driven Venetian blinds, roller shutters, awnings and similar hangings
• Mounting in appliance boxes according to DIN 49073

• Actuator for switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps (minimum load=1W), dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps.
• Operating in KNX systems
• Mounting on DIN rail according to DIN EN 60715 in sub-distribution unit

• Inputs for polling of conventional, potential-free contacts in KNX systems and for sending telegrams to the KNX bus for signalling of statuses, meter readings, operation of loads, etc.
• Outputs for activation of LEDs
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• When mounting behind switch inserts and push-button inserts, use an appliance box with sufficient installation depth

• Inputs for polling of conventional, potential-free contacts in KNX systems and for sending telegrams to the KNX bus for signalling of statuses, meter readings, operation of loads, etc.
• Outputs for activation of LEDs
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• When mounting behind switch inserts and push-button inserts, use an appliance box with sufficient installation depth

• Inputs for polling of conventional, potential-free contacts in KNX systems and for sending telegrams to the KNX bus for signalling of statuses, meter readings, operation of loads, etc.
• Outputs for activation of LEDs
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• When mounting behind switch inserts and push-button inserts, use an appliance box with sufficient installation depth

• Inputs for polling of conventional, potential-free contacts in KNX systems and for sending telegrams to the KNX bus for signalling of statuses, meter readings, operation of loads, etc.
• Outputs for activation of LEDs
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• When mounting behind switch inserts and push-button inserts, use an appliance box with sufficient installation depth

• Inputs for polling of conventional, potential-free contacts in KNX systems and for sending telegrams to the KNX bus for signalling of statuses, meter readings, operation of loads, etc.
• Outputs for activation of LEDs
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• When mounting behind switch inserts and push-button inserts, use an appliance box with sufficient installation depth

• Inputs for polling of conventional, potential-free contacts in KNX systems and for sending telegrams to the KNX bus for signalling of statuses, meter readings, operation of loads, etc.
• Outputs for activation of LEDs
• Mounting in appliance box with dimensions according to DIN 49073 in combination with a suitable cover
• When mounting behind switch inserts and push-button inserts, use an appliance box with sufficient installation depth

• Connecting PCs to KNX systems
• Addressing, programming and diagnostics of KNX devices
• Compatible with KNX Data-Secure products
• Support of long frames for ETS5/6
• FM device: Mounting in appliance box according to DIN 49073
• RMD device: Installation in small distributor board on DIN rail according to DIN EN 60715

• Controlling of luminaires and other applications with DALI operating device in KNX installations, e.g. electronic ballast
• Integration of DALI-2 sensors possible
• Mounting on DIN rail according to EN 60715 in distribution boxes

• Controlling of luminaires and other applications with DALI operating device in KNX installations, e.g. electronic ballast
• Integration of DALI-2 sensors possible
• Mounting on DIN rail according to EN 60715 in distribution boxes

• Controlling of luminaires and other applications with DALI operating device in KNX installations, e.g. electronic ballast
• Mounting on DIN rail according to EN 60715 in distribution boxes
• Simple configuration without DALI commissioning - DALI Plug&Play