Product Sheet

NEW!

Zigbee Dimming Actuator Mini

57006000

Product features

  • Zigbee Actuator to integrate with all Zigbee systems with Zigbee 3.0 Standard
  • Dimming actuator for all standard lamps
  • Dimming using the leading edge phase control and trailing edge phase control principle
  • Automatic or manual load setting in the appropriate dimming mode
  • Parameterisation via NEXENTRO Config App
  • Updateable via NEXENTRO Config App
  • Installation in appliance boxes behind push-buttons
  • Input for connecting a push-button
  • Display of the selected operating mode
  • Activation through bulb-preserving soft-start
  • Electronic short-circuit protection with permanent shutdown after 7 seconds
  • Electronic excess temperature protection
  • Screw terminal for the through-wiring of existing conductors (max. 16 A)
  • Button and LED for commissioning and functionality tests
  • No neutral conductor connection required

Specifications

Rated voltage AC 230 / 240 V~
Mains frequency 50 / 60 Hz
Standby power max. 0.2 W
Power loss max. 1.7 W
Ambient temperature -5 ... +45 °C
Storage / Transport temperature -25 ... +70 °C

Connected load

Incandescent lamps 20 ... 140 W
HV-halogen lamps 20 ... 140 W
Electronic transformers 20 ... 140 W
Inductive transformers 20 ... 140 VA
HV-LED lamps 3 ... 200 W (trailing edge)
Power boosters no
Cable length max. 3 m (Input)
Length approx. 48 mm
Width approx. 45 mm
Height approx. 20 mm

Zigbee

Radio frequency 2.400 ... 2.483 GHz
Transmission capacity 1 mW
Communication protocol Zigbee 3.0 (Router)

Bluetooth

Radio frequency 2.402 ... 2.480 GHz
Transmission capacity max. 2.5 mW, Class 2
Transmitting range typ. 10 m

More products

NEW!
Zigbee Blinds Actuator Mini

Zigbee Blinds Actuator Mini

Blinds actuator for control of electrical blinds, shutters or awning in a Zigbee 3.0 system. The device provides two inputs for connecting blind switches or blind push-buttons. The installation takes place in the appliance box behind the switch/push-button or in the shutter housing next to the motor. Configuration and immediate function test via the Prog. button.

More
NEW!
Zigbee Pushbutton Interface 2-gang 230 V

Zigbee Pushbutton Interface 2-gang 230 V

Push-button interface for switching and dimming lighting and for contolling blinds and shutters in a Zigbee 3.0 system. The device provides two inputs for connecting singe and serial switches and push-buttons. It is installed in the appliance box behind the switch or push-button.

More
NEW!
Zigbee Switching Actuator Mini

Zigbee Switching Actuator Mini

Switch actuator with 16 A switching capacity for the control of electrical loads like luminaires, socket outlets, pumps and many more in a Zigbee 3.0 System. The device provides one input for connection of switches or push-buttons. Configuration and immediate function test via the Prog. button. It is installed in the appliance box behind the switch or push-button.

More
NEW!
Zigbee DALI TW Converter with power supply

Zigbee DALI TW Converter with power supply

DALI control device for integration of luminaires with DALI interface into a Zigbee 3.0 system. It supports setting the colour temperature for luminaires with DALI device type 8 and type 6 acc. to IEC 62386-209. The device provides one input for connecting a push-button. The installation takes place inside of the DALI luminaire or suspended ceiling. Switch-on and
minimum brightness and colour temperature limits can be saved permanently. Configuration and immediate function test via the Prog. button.

More